Your spill control
Are you prepared to handle any spill situation you encounter?
In the event of a chemical spill, the individual who caused the spill is responsible for prompt and proper clean-up.
Improper clean-up of a chemical spill may result in injury, illness, fire, a release to the environment, or property damage.
Acids, caustics, solvents, formaldehyde… no matter what the spill, make sure you have an ANSUL® SPILL-X® spill treatment agent on hand.
It's the easiest, fastest, and most efficient method to handle a small to medium chemical spill before it becomes a big problem.
| SPILL-X-A® | agent will neutralize and solidify most organic and inorganic acids, including hydrofluoric acid |
|---|---|
| SPILL-X-S® | agent is a solvent adsorbent for organic materials like benzene or xylene. |
| SPILL-X-C® | agent is a neutralizer and solidifier for caustics such as sodium hydroxide. |
| SPILL-X-FP® | agent polymerizes and solidifies formaldehyde spills. |
| SPILL-GUN APPLICATOR® |
SPILL-GUN applicators are rugged, easy to use, and can be recharged in the field. The SC-30 SPILL-GUN applicator (for use with SPILL-X-A, SPILL-X-C, SPILL-X-S agents) applies agent from a distance of 10 to 12 feet (3 to 3.7m) and can treat up to a 3-gallon (11.4L) spill, or 100ft2 (9.3m2). |
|---|
Effects
- SPILL-X-A
-
←95% sulfuric Acid Neutralized with SPILL-X-A pH9.05
What does it do?
Neutralizes and soildifies organic and inorganic acids such as sulfuric, hydrochloric, nitris and phosphoric. SPILL-X-A agent changes the pH of a hazardous acid spill so it no longer exhibits thr EPA characteristic of corrosivity for hazardous waste.
- SPILL-X-S
-
←50% Sodium Hydroxide Neutralized with SPILL-X-C pH4.94
What does it do?
Neutralizes and soildifies organic and inorganic caustics such as sodium, hydroxide, potassium hydroxide hydroazine and ammonium hydroxide.
- SPILL-X-C
-
←99.9% Heptance Adsorbed with SPILL-X-S
Is adsorption the same as adsorption?
NO! Both adsorbents and absorbents are able to solidify. However, an adsorbent like SPILL-X-S goes beyond solidification. Adsorption creates a physocal bond between the activated carbon and the solvent. This physivcal bond does two things: Elevates the flash point to a less costly waste material. Reduces evaporative losses(i.e,suppresses vapors)
- SPILL-X-FP
-
←37% Formaldehyde Polymerized with SPILL-X-FP
What does it do?
It is speciality that was designed around its reaction with aqueous solitions of formal dehyde.
